 |
|
|
28.5"W x 27.5"H x
16.5"D |
 |
The 9310 series
slide gate operator is designed for both
residential and high traffic
applications such as gated communities,
apartment complexes, commercial
buildings and industrial sites. This
operator meets the manual operation
requirement of many city governments and
fire authorities. There is no
life-threatening delay for fire, police,
ambulance or other public service
agencies and you’ll never be locked out
of your property. Designed with
versatility in mind, the 9310 can be
configured for front, center or rear
drive applications and can be pad or
post mounted.
• Used in
residential, commercial or industrial
applications for gates up to 45 feet
wide and 1500 Lb.
•
Fail-safe system allows for manual
operation of the gate during power
outages, or when an entrapment condition
exist, without the need for any cranks,
keys or other release devices
• Plug-in
loop detectors simplify wiring and make
installation easy
• Two
convenience outlets for accessory
transformers
•
Operator is designed for front, center
or rear mounting
• Meets
or exceeds the requirements of the UL
325 and 991 safety standards. ETL
listed.
SPECIFICATIONS
Model 9310 1 HP
Maximum gate length 30-feet*.
(*The maximum gate length for the 1 HP
unit is currently 30-feet. This will be
increased to 45-feet pending a change in
the gearbox assembly. We anticipate this
change to be complete by March 04.)
Maximum gate weight 1500 pounds**.
(**Assumes gate is on level ground, in
good condition with properly adjusted
hardware. If DC Convenience Open option
is installed, maximum gate weight is
1300 pounds. Other external factors may
affect the performance of the gate
operator.)
10:1 gear reduction running in a
continuous oil bath.
1 HP continuous-duty motor.
115 VAC, 9.7 Amps; 208 VAC, 4.9 Amps;
230 VAC, 4.9 Amps; 460 VAC, 2.6 Amps.
Operator is shipped with chain brackets
and 20-feet of #40 chain.
Class I, II, III and IV applications.
Compliant with UL 325 and 991. ETL
Listed.
(Note: To be compliant with UL 325 and
industry safety guidelines, a secondary
entrapment prevention device(s) is
required to be installed with this gate
operator. Your professional DKS system
installer can provide you with more
details on these devices and on current
industry safety standards.)
Dimensions: 28.5"W x 27.5"H x 16.5"D
OPTIONS AVAILABLE
WITH THIS OPERATOR
DC powered convenience open.
Nickel plated chain.
Stainless steel chain.
Plug-in loop detectors.
Heater kit for cold environments.
SW150 |
Click for map
