Click2Enter Access Control Click2Enter does away with all of the cumbersome keys, access control codes, and remote control actuators, because every emergency response vehicle and responder carries the key-their mobile or portable radio transceiver. Click2Enter was developed to provide public safety personnel or any authorized user immediate access to gated residences; communities; or any security control mechanism. Other authorized users can even use the Click2Enter, as long as they are programmed into its frequency bank and have a radio transceiver. Click2Enter, compared to other emergency access control systems, will set the industry standard for many years to come. Click2Enter-I takes advantage of state of the art electronics presently being designed into scanner radio technology. This modified scanner/radio technology provides public safety agencies with a quick, safe, reliable, and stealthy means to activate gates, bollards, doors, or any security control mechanisms. The Click2Enter-I combines the scanner/receiver technology with control technology to act as a radio controlled key to open access control devices (gates or security control mechanisms), thus allowing public safety agencies or any authorized users immediate access to deal with emergencies as they occur. To activate the Click2Enter-I the operator must be proximate to the device, and using short transmission pulses of their radio transceiver (software enabled one or two pulse mode) is all that is required to initiate an instant activation/entry. Click2Enter-I stores a running activation log, in memory, for operator recall. The Click2Enter system allows any public safety agency or authorized users access, as long as they are programmed into it's memory. Having the ability to program in multiple users answers the mutual aid problem that presently exists with other emergency access control products. Programming of the Click2Enter-I is accomplished by way of an RS-232 computer interface, so any computer or similar device using standard modem protocol software can be used. Several more unique and desirable features are designed into each Click2Enter-I; please refer to the features list above for more details. The entire activation sequence takes less than four seconds.