- Fast
access - very quick
1 second open/close time.
-
Built in
battery backup - inherent 24 VDC backup
power with regulated 24VDC for
accessories.
-
High
torque 24 volt Permanent Magnet DC
motor.
-
Full
service controller with eight inputs
and LED indicators for loops, card
reader, radio, etc...
-
Continuous duty operation toll rated at
10,000 cycles per day for all
applications (even during power
failures).
-
Reversible arm direction for right or
left handed operation.
-
Instant
Reverse Device (IRD) monitor senses
obstructions going open and close.
-
Automatic open of gate arm when power
is lost if desired (With 15 sec. delay
selection).
-
Raise
gate input memory will memorize
multiple vehicles-ideal for barcode
scanners & AVI.
-
Ability
to have arm STOP in close travel if
tailgating is sensed at close loop.
-
Break
away mounting design for the 4" x 9 Ft.
soft padded aluminum safety arm
(yellow).
-
All rust
proof aluminum construction with powder
coat baked on enamel.
-
Molded
Polyethylene UV stabilized cover never
needs wax or paint (white or colors).
-
Direct
drive gear reducer eliminates many
parts that might otherwise fail.
-
Microprocessor (RISC) based electronics
with watch dog reset timer.
-
State of
the art MOSFET motor drive technology,
NO contactors or relays.
-
Dynamic
motor braking to preserve arm
positioning.
-
Soft
start and stop in open and close travel
motions.
-
No limit
switches to fail-uses magnetic (Hall
Effect) sensors to monitor arm
position.
-
Maximum
Run Timer for motor (MRT) with
anti-tamper protection in closing
direction.
-
Each
unit configurable as master or slave
operator.
-
Safe 24
VDC low voltage motor and control
wiring.
-
Open
architecture PCB with space for
OVERDRIVE CPU for future expanded
options.
-
LED
diagnostic center for easy on-site
trouble shooting.
-
Closing
timer adjustable from 1-33 seconds with
on / off selection.
-
Transorb
diodes on all inputs for protection
against transient voltage spikes.
-
Capable
of being powered by 120 VAC, 220 VAC or
Solar power, standard.
-
U.L.
LISTED (U.S.), C-U.L. LISTED (CANADA)
-
10 year
perforation warranty on cover and
chassis with 2 year on electronics and
mechanism.
-
Interlock with memory when connected to a
slide/swing gate operator, barrier will
wait to raise until that unit reaches its
full open position. Barrier will not
raise if slide/swing gate is tampered
with.
- Tail
gate alarm-K1 relay can be programmed to
fire when a tail gater is sensed on the
close loop.
The
DC SOLUTIONS model MEGA-SPRINT barrier
style parking gate operator is unique in
the industry. Setting the MEGA-SPRINT apart
are many features that make it the front
runner in its class. With standard
features like:
