|
|
|
|
|
Access
Control Distributors of Texas
14307 IH-10 East
Houston, TX 77015
Tel: (713) 330-3330
Fax: (713) 330-3331
Toll-free: (877) 688-GATE
Toll-free: (877) 688-4283
Click
for map
|
|
|
|
|
|
|
| |
| Gate operators and other
heavy equipment (over 70 lbs.) can only be shipped via
common carrier. As such, these orders will not show
the shipping costs during the checkout process.
Common carrier shipping varies considerably due to fuel
price changes and other variables. We will shop for
the best rates possible on your order and add the
shipping cost to your order prior to delivery. If
you would like to get the current shipping rate, please
contact your representative at 1-877-688-4283. |
|
|
|
|
|
|
|
|
|
|
|
Home >
Gate Openers >
Residential Swing Gate Openers
> Door King 6050 Series |
| |
|
|
|
Door King 6050 Swing
Gate Operator |
| Door King 6050 with Control Board
*NOTE: Hardware kits must be ordered with the operator
or you will not have a complete operator!
|
|
List Price: $ 1960.00 |
Our Price: $
1175 |
 |
Door King 6050
Operator Only *NOTE: Hardware kits must be ordered with the operator
or you will not have a complete operator!
|
|
List Price: $ 1450.00 |
Our Price: $
875.00 |
|
| Hardware Kits |
|
Hardware Kit for POST Mount Operator
(DK2600-693) |
|
List Price: $
300.00 |
Our Price: $
185.00 |
|
|
Hardware Kit for PAD Mount Operator
(DK2600-691) |
|
List Price: $
300.00 |
Our Price: $ 185.00 |
|
|
|
|
 |
|
|
13.25"W x 12"H* x
23"D |
13.25"W x 12"H* x
23"D |
 |
 |
The model 6050 swing gate operator is designed to operate vehicular swing gates in residential applications. These operators can be installed on mounting posts or directly onto a concrete mounting-pad. The unique design of these operators allows the gate arm to attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an
aesthetically pleasing installation.
ADVANCED FEATURES:
- Self-adjusting, no maintenance limits.
- Overlap feature for dual swing gate operation.
- Designed with a built-in primary and secondary entrapment prevention system.
- Ports for plug-in loop detectors.
- Fail-safe release.
- Tamper detect circuit.
- Gate tracker reporting output.
- Programming switches.
- Built-in reset switch.
SPECIFICATIONS:
- Model 6050
- Maximum gate width 10-feet.
- Maximum gate weight 400 pounds*.
(*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
- Swings gate 90 degrees in approximately 10-seconds.
- 1/2 HP limited-duty motor.
- 115 VAC, 4.3 Amps.
- Class I applications.
- Compliant with UL 325 and 991. ETL Listed.
(Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate opertator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
- Dimensions (operator only): 13.25"W x 12"H* x 23"D
(* Height of operator only. Actual height above ground is determined by which mounting method is used)
OPTIONS AVAILABLE WITH THIS OPERATOR:
- Master / slave connection cable (6050 slave operator is shipped with 30-feet of cable.)
- Post or pad mount - specify which.
- Plug-in loop detectors.
- Heater kit for cold
environments
SW140 |
|
|
 |
|
|
|
Quick
Specs |
|
Max
Gate Length (ft) |
10 |
|
Max
Gate Weight (lbs) |
400 |
|
Motor |
1/2 HP |
|
Opening Time (sec.) |
12 |
|
|
Kits & Accessories |
|
DK2600-693
Post Mounting Kit
-
Post mounting kit allows the
operator to be mounted on
pipes. Kit includes two 2
inch x 3 foot pipes and
necessary hardware. Use this
kit with the 6050 and 6100
operators only.
$ 185.00
|
DK2600-691
Pad Mounting Kit
-
pad mounting kit allows the
operator to be mounted
directly to a concrete pad.
Kit includes mounting base
and necessary hardware. Use
this kit with the 6050 and
6100 operator only.
$ 185.00
|
DK2600-664
Concrete Base Plate - use to mount a post mount style 6050 or 6100 operator to a concrete pad. Does
not eliminate the need for the post mounting kit.
$
85.00
|
|
|
|
|
|
|
|
Back
to top of page |
|
|
|
|
|
|
|
|
|
|
