|
|
 |
|
|
|
13.25"W x 12"H* x
23"D |
13.25"W x 12"H* x
23"D |
 |
 |
The Model 6100
operators are designed to operate vehicular
swing gates in residential and commercial
applications. These operators are designed
so that they can be either pad or post
mounted without any costly and time
consuming field modifications. You need to
specify which mounting method when
ordering. The unique design of these
operators allows the gate arm to attached
to the bottom rail of the gate. This
eliminates the need for any brackets to be
welded to the face of the gate and creates
an aesthetically pleasing installation. The
6100 can be equipped with a factory
installed DC Convenience Open option which
will automatically open the gate in the
event of a power outage.
ADVANCED FEATURES:
·
Self-adjusting, no maintenance limits.
·
Overlap feature for dual swing gate
operation.
·
Designed with a built-in primary and
secondary entrapment prevention system.
·
Ports for plug-in loop detectors.
·
Fail-safe release.·
Tamper detect circuit.
·
DC Powered convenience open (Option on
6100 only).·
Gate tracker reporting output.
·
Programming switches.·
Built-in reset switch.
Built-in power On/Off switch
SPECIFICATIONS:
Model
6100: Maximum gate width 14-feet.
Maximum gate weight 500 pounds*. (*Assumes
gate swings level and is in good condition
with properly adjusted hardware. Other
external factors may affect the performance
of the gate operator.) Swings gate 90
degrees in approximately 10-seconds. 1/2 HP
continuous-duty motor. 115 VAC, 5.4 Amps.
Class I and Class II applications.
Compliant with UL 325 and 991. ETL listed.
(Note: To be compliant with UL 325 and
industry safety guidelines, additional
secondary entrapment prevention devices may
need to be installed with this gate
operator. Your professional DKS system
installer can provide you with more details
on these devices and on current industry
safety standards.) Dimensions (operator
only): 13.25"W x 12"H* x 23"D (28"D with
convenience open option) (* Height of
operator only. Actual height above ground
is determined by which mounting method is
used)
OPTIONS AVAILABLE WITH THIS
OPERATOR:
Master / slave
connection cable (6050 slave operator is
shipped with 30-feet of cable; 6100 slave
operator is shipped with 40-feet of
cable.). Post or pad mount - specify which.
DC powered convenience open (6100 only).
Plug-in loop detectors. Heater kit for cold
environments.
SW140 |
