|
|
 |
|
|
13.25"W x 12"H* x
28"D |
13.25"W x 12"H* x
28"D |
 |
 |
The 6300 series
operators are designed to operate vehicular
swing gates in residential, commercial and
industrial applications. These operators
are designed so that they can be either pad
or post mounted without any costly and time
consuming field modifications. You need to
specify which mounting method when
ordering. The unique design of these
operators allows the gate arm to attached
to the bottom rail of the gate. This
eliminates the need for any brackets to be
welded to the face of the gate and creates
an aesthetically pleasing installation.
These operators can be equipped with a
factory installed DC Convenience Open
option which will automatically open the
gate in the event of a power outage
ADVANCED FEATURES:
-
Self-adjusting, no maintenance limits.
-
Overlap
feature for dual swing gate operation.
-
Designed with
a built-in primary and secondary
entrapment prevention system.
-
Ports for
plug-in loop detectors.
-
Two
convenience outlets.
-
Fail-safe
release.
-
Tamper detect
circuit.
-
DC Powered
convenience open (optional).
-
Gate tracker
reporting output.
-
Programming
switches.
-
Built-in
reset switch.
-
Built-in
power On/Off switch.
SPECIFICATIONS:
Model
6300 with 1/2 HP Motor: Maximum
gate width 18-feet. Maximum gate weight 700
pounds*. (*Assumes gate swings level and is
in good condition with properly adjusted
hardware. Other external factors may affect
the performance of the gate operator.)
Swings gate 90 degrees in approximately
15-seconds. 1/2 HP continuous-duty motor.
115 VAC. 230 VAC. 460 VAC. Class I, II, III
and IV applications. Compliant with UL 325
and 991. ETL Listed.
(Note: To be
compliant with UL 325 and industry safety
guidelines, additional secondary entrapment
prevention devices may need to be installed
with this gate operator. Your professional
DKS system installer can provide you with
more details on these devices may need to
be installed with this gate operator. Your
professional DKS system installer can
provide you with more details on these
devices and on current industry safety
standards.) Dimensions (operator only):
13.25"W x 12"H* x 28"D (* Height of
operator only. Actual height above ground
is determined by which mounting method is
used)
Model
6300 with 1 HP Motor: Maximum gate
width 22-feet. Maximum gate weight 800
pounds*. (*Assumes gate swings level and is
in good condition with properly adjusted
hardware. Other external factors may affect
the performance of the gate operator.)
Swings gate 90 degrees in approximately
15-seconds. 1 HP continuous-duty motor. 115
VAC. 230 VAC. 460 VAC. Class I, II, III and
IV applications. Compliant with UL 325 and
991. ETL listed. (Note: To be compliant
with UL 325 and industry safety guidelines,
additional secondary entrapment prevention
devices may need to be installed with this
gate operator. Your professional DKS system
installer can provide you with more details
on these devices and on current industry
safety standards.) Dimensions (operator
only): 13.25"W x 12"H* x 28"D (* Height of
operator only. Actual height above ground
is determined by which mounting method is
used)
OPTIONS AVAILABLE WITH THIS
OPERATOR:
Master / slave
connection cable (slave operator is shipped
with 50-feet of cable). Post or pad mount -
specify which. DC powered convenience open.
Plug-in loop detectors. Heater kit for cold
environments.
SW160 |
