|
|
|
|
Access Control Distributors of Texas
14307 IH-10 East
Houston, TX 77015
Tel: (713) 330-3330
Fax: (713) 330-3331
Toll-free: (877) 688-GATE
Toll-free: (877) 688-4283
 Click for map
|
|
| |
|
| |
| |
| Gate
operators and other heavy equipment (over 70 lbs.) can only be shipped
via common carrier. As such, these orders will not show the
shipping costs during the checkout process. Common carrier
shipping varies considerably due to fuel price changes and other
variables. We will shop for the best rates possible on your order
and add the shipping cost to your order prior to delivery. If you
would like to get the current shipping rate, please contact your
representative at 1-877-688-4283. |
|
|
|
| |
| |
| |
|
|
Home > Gate Openers > Commercial Swing Gate Operators
> Elite CSW200 UL
|
| |
|
|
| Elite CSW 200 UL Commercial
Swing Gate Operator |
| CSW 200 UL Commercial
Swing Gate Opener |
| List Price: $ 2,921.00 |
Our Price: $ 1595.00 |
|
| CSW 200
UL DC Commercial Opener with power back-up |
| List Price: $
3,650.00 |
Our Price: $
1895.00 |
|
|
|
 Commercial Swing Gate operator for
use in high traffic applications. This is our most popular
swing gate operator. The CSW-2000-UL is designed for
high traffic applications such as heavily accessed gated communities
and commercial buildings. It is capable of handling gates up to 600
lbs. and 18' at 75 cycles per hour with normal ambient temperatures.
The most popular of all swing gate operating systems nationwide.
Electrical
Specifications:
|
120 VAC Power
|
|
Built-in 120 VAC power
receptacle (NEMA 5-15). |
| Alarm |
|
If the gate hits a vehicle
twice while opening or closing, the system will shut down and an alarm
will sound for five minutes. After five minutes, the system will
automatically reset itself. To reset the system manually, a reset
button must be used.
|
Alternate Outputs
|
|
With Omni Option board,
three push button command control, burglar alarm input and output. |
Burglar Alarm
|
|
With Omni Option board,
interfaces with existing home alarm or alarm output.
|
Digital Motor
Protection
|
|
Entrapment sensor shuts off
the motor after it reaches the stall amp for 3 seconds, reverses
direction for several inches and stops.
|
Electronic Inputs
|
|
Radio receiver, key switch,
safety loop, center loop, telephone entry system, computer input, fire
department key switch, and 3-push-button station.
|
ERD Sensor
|
|
If the gate hits a vehicle
while closing, it re-opens. If it hits a vehicle while opening, it
stops, reverses 4 to 6 inches, and stops again.
|
Gate Traveling
Time
|
|
Adjusted by a precision
mechanical device and electrical limit switch system.
|
Integrated Loop
Detectors
|
|
Easy to install, modular,
plug in loop detector inputs for exit loop, center loop, and safety
loop.
|
Intelligent
Master/Slave
|
|
Precise, synchronized
movement and communication between two gate operators using three wire
RS-485 bi-directional technology.
|
Magnetic Lock
|
|
With Omni Option board,
magnetic lock system is incorporated, allowing easy addition of the
MG1300 locking system to the gate.
|
Modular Board
|
|
Uses LEDs to indicate all
input and output functions of the gate operator.
|
Motor Drive
|
|
Solid state electronic motor
drive system is incorporated into the board.
|
Power Input
|
|
Controls power input to the
board with convenient switch.
|
Power Management
|
|
Board includes electronic
power management with over current shutdown and automatic recovery.
|
Soft Stop
|
|
Gate travels through the
cycle at normal speed and comes to a stop slowly for more accurate gate
cycle. Equipped with integrated time delay for long mechanical life
expectancy.
|
Spike Suppressors
|
|
20,000 Amps and near
lightning protection with modular omni surge suppressor. Initial
response time: 0.000000000001 seconds.
|
Three Push Button
Control
|
|
On board gate operator
control for close, stop and open.
|
Timer
|
|
Adjustable timer can be set
from 0-60 seconds.
|
Mechanical Specifications:
|
| Approval |
|
UL and ETL listed to the
latest UL325 and UL991 specifications. |
| Chassis |
|
Constructed with .25 inch
sanded, welded, and gold zinc plated sheet metal. |
| Cover |
|
High density polyethylene
plastic and stainless steel for excellent heat and corrosion resistance. |
| Cycles |
|
75 cycles per hour with a
600 pound gate. |
| Dimensions |
|
Length = 20.5in x Width =
15in x Height 28in. |
Emergency Release
|
|
The gate is easily
disconnected by turning the release handle. the best option is our
DC-1000CSW. |
| Finish |
|
All metal parts are gold
zinc plated for rust proof protection. |
| Gate Length |
|
18 feet maximum gate length. |
| Motor |
|
1/2 hp, instant reversing,
120VAC, 4 amp, 1625 rpm, with high speed ball bearings. |
| Output Shaft |
|
2.5 inch cold rolled steel. |
| Shipping Weight |
|
175 pounds. |
| Travel Speed |
|
90° opening in 13-15
seconds. |
| Warranty |
|
Seven(7) years for single
home use and five(5) years for commercial use. |
| Weight |
|
160 pounds. |
Weight Capacity
|
|
600 pounds maximum gate
weight. |
Worm Gear
Reduction
|
|
Two, 30-to-1 worm gears
equal a 900-to-1 reduction. Both are lubricated in an oil bath. |
|
|
|
|
|
|
|
|
Quick Specs
|
| Max Gate Length (ft) |
20 |
| Max Gate Weight (lbs) |
600 |
| Cycles per hour |
75 |
|
|
|
|
| |
|
|
Back to top of page
|
|
| |
|
| |
|
|
|
|
