|
|
|
|
Access Control Distributors of Texas
14307 IH-10 East
Houston, TX 77015
Tel: (713) 330-3330
Fax: (713) 330-3331
Toll-free: (877) 688-GATE
Toll-free: (877) 688-4283
 Click for map
|
|
| |
|
| |
| |
| Gate
operators and other heavy equipment (over 70 lbs.) can only be shipped
via common carrier. As such, these orders will not show the
shipping costs during the checkout process. Common carrier
shipping varies considerably due to fuel price changes and other
variables. We will shop for the best rates possible on your order
and add the shipping cost to your order prior to delivery. If you
would like to get the current shipping rate, please contact your
representative at 1-877-688-4283. |
|
|
|
| |
| |
| |
|
|
Home > Gate Openers > Commercial Slide Gate Openers
> Elite SL3000 Series
|
| |
|
|
| Elite SL 3000 UL Commercial
Slide Gate Operator |
| SL 3000 UL Commercial Slide Gate Opener |
| List
Price: $ 2,552.00 |
Our Price: $ 1295.00
|
|
|
SL 3000 UL DC With Power Back-Up |
| List Price: $ 3,235.00 |
Our Price: $ 1595.00
|
|
|
|
 Commercial Slide
Gate Operator (1/2 hp) for use in high traffic applications.
Capable of continuous cycles daily. The Sl-3000-Ul™
is smooth and exceptionally quiet. This unit can handle continuous
cycles daily with gates up to 1000 lbs. and 37 ft. in length with a
traveling speed of 12 inches per second. It is designed for high
traffic applications such as heavily accessed gated communities and
commercial buildings
Electrical Specifications
|
120 VAC Power
Built-in 120 VAC power receptacle (NEMA 5-15)
Alarm If
the gate hits an object twice while opening or closing, the system will
shut down and an alarm will sound for five minutes
Alternate
Outputs With Omni Option board, three push button command
control, burglar alarm input and output. QCC option available
Burglar Alarm
With Omni Option board, interfaces with existing home alarm or alarm
output
Digital Motor
Protection Entrapment sensor shuts off the motor after it
reaches the stall amp for 3 seconds, reverses direction for several
inches and stops
Electronic
Inputs Radio receiver, key switch, hold open loop, center
loop, telephone entry system, computer input, fire department key
switch, and 3-push-button station
ERD Sensor
If the gate hits a vehicle while closing, it re-opens. If it hits a
vehicle wile opening, it stops, reverses 4 to 6 inches, and stops again
Gate Traveling
Time Adjusted by a precision mechanical device and electrical
limit switch system
Integrated
Loop Detectors Easy to install, modular, plug in loop detector
inputs for exit loop, center loop, and hold open loop
Intelligent
Master/Slave Precise, synchronized movement and communication
between two gate operators using three wire RS-485 bi-directional
technology
Magnetic Lock
With Omni Option board, magnetic lock system is incorporated, allowing
easy addition of the MG1300 locking system to the gate
Modular Board
Uses LEDs to indicate all input and output functions of the gate
operator
Motor Drive
Solid state electronic motor drive system is incorporated into the
board
Power Input
controls power input to the board with convenient switch
Power
Management Board includes electronic power management with
over current shutdown and automatic recovery
Soft Stop
Gate travels through the cycle at normal speed and comes to a stop
slowly for more accurate gate cycle. Equipped with integrated time
delay for long mechanical life expectancy
Spike
Suppressors 20,000 Amps and near lightning protection with
modular omni surge suppressor. Initial response time: 0.000000000001
seconds
Three Push
Button Control On board gate operator control for close, stop
and open
Timer
Adjustable timer can be set from 0-60 seconds.
|
Mechanical Specifications
|
Approval
UL and ETL listed to the latest UL325 and UL991 specifications
Chassis
Constructed with .25 inch sanded, welded, and gold zinc plated sheet
metal
Cover High
density polyethylene plastic and stainless steel for excellent heat and
corrosion resistance
Cycles 75
cycles per hour with a 600 pound gate
Dimensions
Length = 18in x Width = 19in x Height 25in
Emergency
Release The gate is easily disconnected by turning the release
handle. the best option is our DC-1000SL
Finish All
metal parts are gold zinc plated for rust proof protection
Gate Length
37 feet maximum gate length
Motor
1/2 hp, instant reversing, 120VAC, 4 amp, 1625 rpm, with high speed
ball bearings
Output Shaft
1 inch cold rolled steel
Travel Speed
12 inches per second average gate speed
Warranty
Seven(7) years for single home use and five(5) years for commercial use
Weight Capacity
1000 pounds maximum gate weight
Worm Gear
Reduction 30-to-1 worm gear reduction in an oil bath
|
|
|
|
|
|
|
|
Quick Specs
|
| Max Gate Length (ft) |
37 |
| Max Gate Weight (lbs) |
1000 |
| Gate Speed (in/sec) |
12 |
| Cycles/Day |
CONT |
|
|
|
|
| |
|
|
Back to top of page
|
|
| |
|
| |
|
|
|
|
