|
 Dual
Motor Commercial Slide Gate Operator for
use in high temperature environments. One
motor opens the gate, the other closes it.
The SL-3000-UL-DM™ uses a unique, patented,
dual motor feature. One motor opens the
gate and the other one closes it, unlike
any other operator in the world. Because of
this feature the operator can function in
less than ideal conditions, such as desert
environments, and not overheat the motors.
It is capable of continuous cycles on gates
up to 37' and 800 lbs. The SL-3000-UL-DM™
is specified for use at heavily accessed
high traffic areas such as multiple family
communities with 250 or more homes in high
ambient temperature applications
Electrical
Specifications
|
120 VAC Power
Built-in 120 VAC power receptacle (NEMA
5-15)
Alarm If the gate
hits an object twice while opening or
closing, the system will shut down
and an alarm will sound for five
minutes
Alternate Outputs
With Omni Option board, three push
button command control, burglar alarm
input and output. QCC option
available
Burglar Alarm With
Omni Option board, interfaces with
existing home alarm or alarm output
Digital Motor Protection
Entrapment sensor shuts off the motor
after it reaches the stall amp for 3
seconds, reverses direction for
several inches and stops
Electronic Inputs
Radio receiver, key switch, hold open
loop, center loop, telephone entry
system, computer input, fire
department key switch, and
3-push-button station
ERD Sensor If the
gate hits a vehicle while closing, it
re-opens. If it hits a vehicle wile
opening, it stops, reverses 4 to 6
inches, and stops again
Gate Traveling Time
Adjusted by a precision mechanical
device and electrical limit switch
system
Integrated Loop Detectors
Easy to install, modular, plug in
loop detector inputs for exit loop,
center loop, and hold open loop
Intelligent Master/Slave
Precise, synchronized movement and
communication between two gate
operators using three wire RS-485
bi-directional technology
Magnetic Lock With
Omni Option board, magnetic lock
system is incorporated, allowing easy
addition of the MG1300 locking system
to the gate
Modular Board Uses
LEDs to indicate all input and output
functions of the gate operator
Motor Drive Solid
state electronic motor drive system
is incorporated into the board
Power Input controls
power input to the board with
convenient switch
Power Management
Board includes electronic power
management with over current shutdown
and automatic recovery
Soft Stop Gate
travels through the cycle at normal
speed and comes to a stop slowly for
more accurate gate cycle. Equipped
with integrated time delay for long
mechanical life expectancy
Spike Suppressors
20,000 Amps and near lightning
protection with modular omni surge
suppressor. Initial response time:
0.000000000001 seconds
Three Push Button Control
On board gate operator control for
close, stop and open
Timer Adjustable
timer can be set from 0-60 seconds.
|
Mechanical
Specifications
|
Approval UL and ETL
listed to the latest UL325 and UL991
specifications
Chassis Constructed
with .25 inch sanded, welded, and
gold zinc plated sheet metal
Cover High density
polyethylene plastic and stainless
steel for excellent heat and
corrosion resistance
Cycles 75 cycles per
hour with a 600 pound gate
Dimensions Length =
18in x Width = 19in x Height 25in
Emergency Release
The gate is easily disconnected by
turning the release handle. the best
option is our DC-1000SL
Finish All metal
parts are gold zinc plated for rust
proof protection
Gate Length 37 feet
maximum gate length
Motor 1/2 hp,
instant reversing, 120VAC, 4 amp,
1625 rpm, with high speed ball
bearings
Output Shaft 1 inch
cold rolled steel
Travel Speed 12
inches per second average gate speed
Warranty Seven(7)
years for single home use and five(5)
years for commercial use
Weight Capacity 1000
pounds maximum gate weight
Worm Gear Reduction
30-to-1 worm gear reduction in an oil
bath
|
|
