|
|
|
|
|
Access Control
Distributors of Texas
14307 IH-10 East
Houston, TX 77015
Tel: (713) 330-3330
Fax: (713) 330-3331
Toll-free: (877)
688-4283
Click for map
|
|
|
|
|
|
|
|
|
|
|
Home >
Telephone Entry Systems
> Linear RE-1N |
| |
|
|
|
Linear RE-1N Residential
Telephone Entry System (Nickel) |
|
List
Price $ .00 |
Our Price: $ 795.00 |
 |
|
 The
Model RE-1 Residential
Telephone Entry System is
designed for residential or
light commercial access
control applications. The
speakerphone, keypad, radio
receiver, and optional video
camera are housed in a
rugged enclosure that can be
mounted to a pedestal or
bolted directly to a wall.
The diecast keypad keys have
bright, easy-to-read
graphics and are lit with an
overhead light. The two
operation buttons; CALL and
HELP, are machined for
heavy-duty reliability.
Arriving visitors will
approach the unit and place
a call to the residence by
pressing the CALL button.
The RE-1 will acquire the
residence’s local telephone
line and generate
distinctive rings to the
house telephones. The
resident, knowing that the
distinctive ring is
originating from the access
area, can answer any house
telephone and converse with
the visitor. If the resident
decides to grant access to
the visitor, they can
activate either output relay
in the RE-1 by pressing a
key on the telephone’s
keypad. If the resident
decides not to grant access,
hanging up or pressing a key
will disconnect the
visitor’s call.
If the resident is using the
telephone at the time a
visitor calls, the RE-1 will
sound beeps on the telephone
line to announce that a
visitor is calling. The
resident can press a key on
the telephone to place the
outside caller on hold and
communicate with the
visitor. After granting or
denying access to the
visitor, the outside caller
will be re-connected to the
resident. |
Features
- Dramatic
Contemporary
Styling
- Cast
Housing; or
nickel finish
- Down
lighting
- Voice
Prompts, User
Friendly, Owner
Friendly
- Two
Programmable
Outputs Control
Two Openings
- Obstacle
Reverse, Alarm
Shunt
- Optional Low
Light CCTV
Camera Kit
(Model RE-BWC)
- Provisions
for Knox Box
- Simple to
Program and
Maintain through
On Board Keypad,
Touchtone
Telephone, or
Computer with
Modem
- 500 Event
Memory Log
- Supports 100
Entry Codes
- Supports 100
Block-Coded
Transmitters
- Applications
Include Single
Residence,
commercial
Sites, Employee
Parking
- Built-in
superheterodyne
radio receiver
- MegaCode
format
- Operating
Frequency: 318
MHz
- Backup
battery ready
- 6.45" W x
10.81" H x 3.74"
D
OUTPUTS:
- Relay:
Two form “C “ relays rated at 3A @ 30 Vac
or Vdc. Each programmable for control,
obstacle, alarm or shunt.
-
Sounder: Programmable for key presses
and relay activation.
- Voice:
Synthesized human voice prompts for
visitor and programming assistance. Voice
is heard through speaker and remote
telephones.
INPUTS:
-
RF:
integral 318 MHz super heterodyne
receiver @ -100dBm sensitivity (typical);
receives Linear block coded transmitters
and MGT supervised reversing edge
transmitters
- Open
Request: terminal input for each
relay; when activated, will trigger the
assigned relay for the programmed relay
on time
- Door
Sense/Inhibit: terminal input for
each relay monitors status of a protected
entry point or can be programmed to
restrict access to the assigned relay
-
Keypad: 12 digit telephone style
keypad for accepting entry codes and for
local programming
- Power:
16 Vac (transformer included); input for
externally charged 12 to 24 Vdc battery
backup Current Draw (dialing out to one
phone): 16 Vac: 270 mA standby, 440 mA
operating, 12 Vdc: 250 mA standby, 500 mA
operating, 24 Vdc 150 mA standby, 300 mA
operating 16 Vac: 270 mA standby, 440 mA
operating, 12 Vdc: 250 mA standby, 500 mA
operating, 24 Vdc 150 mA standby, 300 mA
operating
-
Operating Temperature: -22°F to 149°F
(-30°C to 65°C)
PROGRAMMING:
-
Programming: Locally via keypad;
remotely via touchtone telephone phone or
computer with modem running a web
browser. NO SOFTWARE REQUIRED
-
Memory: All data memory is stored in
non volatile EEPROM with data retention
in excess of 10 years
-
Clock/Calendar: 24/7 clock/calendar
with battery backup used for time zones;
relay hold open times; date/time stamp
for event log entries; downlight on/off
times
-
Connections: All power, telephone,
relay and control connections to the unit
are with plug on screw terminal blocks;
RJ-45 and BNC connections for optional
RE-BWC camera kit
|
|
|
|
|
Back
to top of page |
|
|
|
|
|
|
|
|
|
|
