|
|
|
|
|
Access Control
Distributors of Texas
14307 IH-10 East
Houston, TX 77015
Tel: (713) 330-3330
Fax: (713) 330-3331
Toll-free: (877)
688-4283
Click for map
|
|
|
|
|
|
|
|
|
|
|
Home >
Telephone Entry Systems
> Linear RE-1SS |
| |
|
|
|
Linear RE-1SS
Residential Telephone Entry System
(Stainless Steel) |
|
RE-1SS |
Our Price: $ 825.00 |
 |
|
The Model RE-1 Residential Telephone
Entry System is designed for
residential or light commercial
access control applications. The
speakerphone, keypad, radio
receiver, and optional video camera
are housed in a rugged enclosure
that can be mounted to a pedestal or
bolted directly to a wall. The
diecast keypad keys have bright,
easy-to-read graphics and are lit
with an overhead light. The two
operation buttons; CALL and HELP,
are machined for heavy-duty
reliability.
Arriving visitors will approach the
unit and place a call to the
residence by pressing the CALL
button. The RE-1 will acquire the
residence’s local telephone line and
generate distinctive rings to the
house telephones. The resident,
knowing that the distinctive ring is
originating from the access area,
can answer any house telephone and
converse with the visitor. If the
resident decides to grant access to
the visitor, they can activate
either output relay in the RE-1 by
pressing a key on the telephone’s
keypad. If the resident decides not
to grant access, hanging up or
pressing a key will disconnect the
visitor’s call.
If the resident is using the
telephone at the time a visitor
calls, the RE-1 will sound beeps on
the telephone line to announce that
a visitor is calling. The resident
can press a key on the telephone to
place the outside caller on hold and
communicate with the visitor. After
granting or denying access to the
visitor, the outside caller will be
re-connected to the resident.
|
Features
- Dramatic
Contemporary Styling
- Cast Housing;
stainless steel finish
- Downlighting
- Voice Prompts, User
Friendly, Owner Friendly
- Two Programmable
Outputs Control Two
Openings
- Obstacle Reverse,
Alarm Shunt
- Optional Low Light
CCTV Camera Kit (Model
RE-BWC)
- Provisions for Knox
Box
- Simple to Program
and Maintain through On
Board Keypad, Touchtone
Telephone, or Computer
with Modem
- 500 Event Memory Log
- Supports 100 Entry
Codes
- Supports 100
Block-Coded Transmitters
- Applications Include
Single Residence,
commercial Sites,
Employee Parking
- Built-in
superheterodyne radio
receiver
- MegaCode format
- Operating Frequency:
318 MHz
- Backup battery ready
- 6.45" W x 10.81" H x
3.74" D
OUTPUTS:
- Relay:
Two form “C “ relays rated at 3A @ 30 Vac
or Vdc. Each programmable for control,
obstacle, alarm or shunt.
-
Sounder: Programmable for key presses
and relay activation.
- Voice:
Synthesized human voice prompts for
visitor and programming assistance. Voice
is heard through speaker and remote
telephones.
INPUTS:
-
RF:
integral 318 MHz super heterodyne
receiver @ -100dBm sensitivity (typical);
receives Linear block coded transmitters
and MGT supervised reversing edge
transmitters
- Open
Request: terminal input for each
relay; when activated, will trigger the
assigned relay for the programmed relay
on time
- Door
Sense/Inhibit: terminal input for
each relay monitors status of a protected
entry point or can be programmed to
restrict access to the assigned relay
-
Keypad: 12 digit telephone style
keypad for accepting entry codes and for
local programming
- Power:
16 Vac (transformer included); input for
externally charged 12 to 24 Vdc battery
backup Current Draw (dialing out to one
phone): 16 Vac: 270 mA standby, 440 mA
operating, 12 Vdc: 250 mA standby, 500 mA
operating, 24 Vdc 150 mA standby, 300 mA
operating 16 Vac: 270 mA standby, 440 mA
operating, 12 Vdc: 250 mA standby, 500 mA
operating, 24 Vdc 150 mA standby, 300 mA
operating
-
Operating Temperature: -22°F to 149°F
(-30°C to 65°C)
PROGRAMMING:
-
Programming: Locally via keypad;
remotely via touchtone telephone phone or
computer with modem running a web
browser. NO SOFTWARE REQUIRED
-
Memory: All data memory is stored in
non volatile EEPROM with data retention
in excess of 10 years
-
Clock/Calendar: 24/7 clock/calendar
with battery backup used for time zones;
relay hold open times; date/time stamp
for event log entries; downlight on/off
times
-
Connections: All power, telephone,
relay and control connections to the unit
are with plug on screw terminal blocks;
RJ-45 and BNC connections for optional
RE-BWC camera kit
|
|
|
|
|
Back
to top of page |
|
|
|
|
|
|
|
|
|
|
