-
Multiple user selectable
flash patterns.
Multi-level warning, LED
modules operate in ALL ON,
LEFT/RIGHT, or TOP/BOTTOM
patterns depending on
customer's module selection.
Lower level Traffic Director
can be operated
independently in LEFT, RIGHT
or CENTER OUT patterns or be
synced to flash with or
alternate with upper level.
Input 12-28 Volts DC, draws
only 5 amps (48" bar with 14
led modules).
Meets SAE J 845
requirements, NFPA and J2498
packages available.
Mounting hardware included
(permanent or hook-on).
Clear lenses are standard,
colored lenses can be
ordered on single color LED
modules. Multi colored LED
modules must use clear
lenses.
See all configurations and
available colors.
5 year warranty on LED
modules and LED controllers.
Available sizes: 17", 24",
32", 40", 48", 56", 64",
72", 80", 88", 96".
Electrical:
 12-28VDC
operation
5
Amp average (48" bar 14 LED
modules)
Size and Weight:
4.75"
high(120.6mm) x (width varies on
lightbar) x 11.5" wide(292mm) x
39lbs.(17.7kg)Operating
Temperature Range:
-50°C
to +85°C
Lightbar Options:
 |
|
Lower Level
Traffic
Director- Rear
Facing,
Lower level
Traffic Director
can be operated
independently in
LEFT, RIGHT, or
CENTER OUT
patterns or be
synced to flash
with, or
alternate with,
the upper level
LEDs.
|
 |
 |
|
54 or 74 Watt
Takedown Light-
Forward facing,
to light the
scene in front
of your vehicle |
LED Takedown
Light-
Forward facing,
to light the
scene in front
of your vehicle |
 |
 |
|
Split 35 Watt
Takedown Lights-
Forward facing,
to light the
scene in front
of your vehicle |
35 Watt Alley
Light- Side
facing, mounted
as end caps, to
light the scene
beside your
vehicle. |
|
|
Ordering Example: |
|
Model No. |
|
Width/Lamps |
|
Options |
|
|
930L |
+ |
4805 |
+ |
/A/T |
Mounting Hardware (included)
All TOMAR lightbars may
be permanently mounted (no hook
required) or hook-on mounted.
All permanent mounted lightbars
use the UNPK permanent mount
kit. All hook-on mounted
lightbars use the UNHK mounting
bracket PLUS a hook kit. Please
see
Mounting Hardware Reference
Guide IS0056 to determine
the part number of the hook kit
needed. |
The 930L and 930LD series lightbars
combine revolutionary optical design
with state-of-the-art LED technology to
provide the most powerful emergency
warning systems available. These
lightbars offer fully integrated
mult-level warning capabilities with
unprecedented control flexibility. The
930L lightbar uses a traditional multi-wire cable
to interface with virtually any
controller or switch box. The 930LD
lightbar is equipped with a digital
control cable utilizing a standard RJ45
(typical PC network cable) interface
which connects to a TOMAR
940L-DCP or
940L-Siren controller.
