The 2080 Optical Signal Processor (OSP) is TOMAR’s mid-range OSP providing the advanced detection and discrimination of all 2000 Series OSP’s with improved system security and upgradeability. Installed inside the traffic cabinet, the 2080 provides power for 209X Optical Detectors, receives, decodes, and prioritizes signals from the detectors, and optically isolates the preemption channels.

The 2080 is delivered default programmed to respond on a first-come, first-served basis to optical signals from vehicles within two signal bands. Emergency band signals are typically emitted by emergency vehicles to effect a preemption of normal traffic control timing and are given the highest priority to allow rapid emergency response with enhanced safety.

Transit band signals are generally emitted by transit or other non-emergency municipal vehicles to effect a priority change for the vehicle’s approach direction without necessarily interrupting traffic control timing.

The 2080 OSP is compatible with NEMA TS-1, TS-2, and CA/NY 170 controllers and meets all NEMA and CalTrans environmental requirements. The 2080 plugs directly into a 170 input file without any additional hardware and does not use the internal 24VDC cabinet power. For NEMA cabinets without prewired preemption slots, the TOMAR model 1881 rack provides the necessary hardware and harnessing to allow simple connection to detector outputs and controller inputs.

The TOMAR 2080 Optical Signal Processor offers the following features:

• Competitive Coded Detect allows the 2080 to detect coded 3M emitters without actually decoding their signal. So, the 2080 can lockout non-coded emitters and still detect and prioritize coded TOMAR and coded 3M emitters.
• Modular construction allows tool-less field repair and firmware upgrades. Competitive products using surface mount technology must be returned to the factory for proper repair.
• Plug and Play firmware allows the adding of preemption channels or other accessories in the field without manual configuration. You buy only what is needed today and add more capability later, saving precious funds.
• Active Reflection Suppression prevents cross street preemption due to reflected emitter energy. Only TOMAR’s advanced, digital signal processing can eliminate this troublesome side effect making system installation and set up far less critical.
• Full upgradability to 2140 OSP insures that you can start your Strobecom II system inexpensively and add all the logging and communication capability of the 2140 OSP later.
• Diagnostic Switches and LEDs provides feedback on the health of the 2080.
• Expansion port for easy connection of the 2080 to other accessory modules like green phase monitors, confirmation light drivers, and external preemption adapters for controllers that do not have internal preemption software.
• Preemption channel disconnect switches allow the preemption outputs from the 2080 to be physically disconnected from the controller inputs during setup and test. Traffic technicians can perform all system setup without disrupting traffic flow with system tests.

TRUE 10 Year Warranty!

Covers the 2080 and all Strobecom II components. Unlike other manufacturers, TOMAR’s 10-year warranty has NO fees or charges for warranty repairs after 5 years.