Tomar Emergency Traffic Preemption Strobe Emitter Systems, Elock

Tomar PRE-EDGE Traffic Preemption Emitter Upgrade Kit For Whelen Edge

PRE-EDGE Preemption Emitter Complete Upgrade Kit For Whelen Edge
List Price: $ .00	Our Price: $ .00

The PRE�EDGE preemption upgrade kit is used to convert the front strobe lamps of a WHELEN lightbar into non-ID preemption emitters so that they will operate TOMAR STROBECOM� or 3M OPTICOM� optical preemption systems. The kit includes a dual frequency 4 lamp power supply, that replaces the front WHELEN strobe power supply, and all necessary hardware and cables to use the lightbar's strobelamps as preemption emitters. The power supply has a parking brake disable feature which may optionally be connected to the vehicles parking brake, drivers door switch, or drive selector switch to automatically switch the emitter off when the vehicle is parked to prevent traffic signal lockup at the scene of an emergency

For Use With These Light Bars: WHELEN - Edge

System Features:

1 - 780-1228-PRE Power Supply

1 - 28" Wire Harness

2 - 6" Lamp Extension Cables

1 - Cable Adapter

1 - Bracket

Power Requirements:
Input Voltage: 10 to 30VDC
Input Channel: 6.5 A avg. @ 12.8V or 3.23 A avg. @ 25.6V

Output:
Four Lamp Preemption or NEOBE� Flash Pattern

Dual Frequency:
Hi Priority 14Hz
Lo Priority 10Hz

Control Features:
All modes are selected by switching positive, low current, battery voltage. The main battery power may be left connected to the supply at all times. Current draw is less than 100 microamps standby. Brake disable circuit auto resets when switch is released.

Construction: (Power Supply)
Glass filled Lexan� case, polyurethane potting

Back to top of page