HySecurity StrongArmCrash M30


  • Brand: HySecurity
  • Product Code: M30
  • Availability: In Stock


Description

HySecurity StrongArmCrash M30

HySecurity STRONGARM M30 reliably defends high security sites world-wide. This high duty cycle, crash certified ASTM F2656-07 M30, P1 barrier arm provides incomparable security and safety using proven controls and hydraulics perfected over decades in the most challenging conditions. Unique dual arm design prevents a large truck and a small passenger vehicle from breaching the security perimeter. Bright LED arm lighting and highly reflective tape on the upper arm, plus a standard traffic light, boost visibility and inhibit accidental impact. The lower arm, at bumper height, reduces possible injury or death from an accidental passenger-car gate-strike. Shields and enclosed controls and hydraulics further safeguard authorized personnel. Integrated, locking hydraulics and highly programmable controls and user relays simplify and reduce the cost of installation and operation. HySecurity backs an unequalled 5-year reliability/quality assurance warranty.

StrongArmCrash barrier arms open/close in 6 to 8 seconds with an Emergency Fast Close time of 5 to 7 seconds. Standard hot dipped galvanized steel chassis provides optimum corrosion protection. Finish options include textured, ultra-durable “Signal Yellow” (TGIC) polyester powder coat over zinc plate for an enduring, attractive finish. Operator ships with one traffic light. Reduce foundation set-up time and ensure accuracy with supplied templates. Choose the StrongArmCrash ExtremeCycle option for extremely high cycle sites. The ExtremeCycle option increases cycles from 100 up to 150 - 200 cycles/hr. Very few sites require more than the 100 cycles/hr already delivered by the standard StrongArmCrash barrier arms.

Easily configure barrier arm operation to specific site requirements with unique and unequalled Smart Touch Controller. PC interface provided for easy configuration and quick troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload latest software, troubleshoot system and save operator configurations. Programmable dual gate or sequenced gate integration. Powerful anti-tailgating configuration. Three user relays with 24 programmable options, plus optional Hy8Relay™ - an extended relay module providing eight additional programmable relay outputs.

Monitor gate system and accessory status, system operational malfunctions, maintenance alerts, or gate breach alarms. Communicate security or operational events to security command and control or service technician in real time via Ethernet/fiber using optional web based HyNet™ Gateway. Target specific security and operational alerts to specific recipients. View or download 16,000 plus events (logged in non-volatile memory) from a remote location or on-site for precise and quick system troubleshooting. Operate and configure gate remotely.

Note: CALL FOR QUOTE. Completed and signed Fortified Crash Barrier application, agreement and operator order form required. ONLY HYSECURITY AUTHORIZED DISTRIBUTORS AND INSTALLERS, trained by HySecurity in proper installation techniques, operation and maintenance, are eligible to purchase HySecurity’s Fortified Crash Barrier products. Training is periodically available and is required prior to the actual purchase or to receive Crash Project installation leads and referrals from HySecurity. See Crash Training at www.hysecurity.com. 

HySecurity offers an optional AC Power Supply w/HyInverter AC™ which provides UPS battery backup for 208/230VAC, single-phase AC gate operators.

Specification

Features
Features Manually Operated StrongArm M30- Install in low cycle sites with no electrical power. HySecurity StrongArm M30 and M50 are now available in manually operated (non-motorized) models.

M30 arms open to full 90°- Full 90 degree opening prevents tall vehicles from clipping arm.

Petrochemical- StrongArmCrash M30 secures sensitive sites from unauthorized admittance.

StrongArmCrash M30 with SwingSmart- Synchronize your dual gate HySecurity operators for added protection.

M30 Crash Test - Crash certified: ASTM F2656-07 M30, P1. The StrongArm M30 operator stops a 15,00 lb (6.8 metric ton) truck traveling 30 mph (48 km/h) with penetration of less than 1 meter.

Inside the M30 - Hydraulic side - StrongArmCrash pivot post is key locked for protection against unauthorized system modifications.

Inside the M30 - Electrical side - StrongArmCrash pivot post is key locked for protection against unauthorized system modifications.
Specifications
Specifications Crash Certified ASTM F2656-07 M30-P1*
Duty Cycle 100 cycles/hr, option for continuous duty
Open/Close Time 6 to 8 seconds depending on arm length
Emergency Fast Close Time 5 to 7 seconds depending on arm length
Clear Opening 12 to 24 ft in 2 ft increments (366 to 732 cm in 61 cm increments). Call for custom arm length.
Full Open Angle Adjustable 90º ± 5º
IngressProtection IP56
Horsepower 2 hp
Drive Hydraulic
1 Phase Power 208/230V 60/50Hz
3 Phase Power 208/230V 60/50Hz or 380/460V 60/50Hz
Temperature Rating -40° to 158° F (-40° to 70° C) or -10° to 158° F (-23° to 70° C) Using biodegradeable fluid. No heater necessary.
Communication RS-232, RS-485; Ethernet/fiber using optional HyNet™ Gateway accessory
User Controls Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and display or a PC using S.T.A.R.T. software.
Relays Two configurable user relays: 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs
Electrical Certification Control panel certified to UL 508A by ETL
Finish Hot dipped galvanized standard. Optional textured yellow powder coat over zinc plating.
Foundation 6 x 6 x 2 ft (183 x 183 x 61 cm) or 4 x 4 x 4 ft (122 x 122 x 122 cm) 3,000 psi concrete, #5 rebar, grade 60
Warranty 5 year

Downloads

Reviews (0)

Write a review

Note: HTML is not translated!
    Bad           Good