The DKS 6003 residential swing gate actuator offers convenience and reliability in a compact design. The actuator mounts directly on your gate and pilaster, simplifying installation and eliminating the need for concrete pads. This compact actuator uses extruded aluminum material to provide a clean profile that will blend in with any gate design. But beauty is not just skin deep with the DKS actuator. The powerful screw driven piston connects directly to the gate eliminating weak mechanical connections and it is fully enclosed to prevent dirt and other airborne corrosives from contaminating the screw threads. There is no need to worry about hydraulic leaks, check valves or pumps.
These actuators feature built in limit switches that precisely control the start / stop speed, and travel of your gate. The microprocessor based electronic control board provides many advanced features typically not found in operators in this class, and is available in a standard and deluxe housing. The deluxe housing provides three 120 VAC convenience outlets to power additional auxiliary device transformers (for telephone entry systems, for example). Both come standard with built-in battery back-up installed.
|Features||Internal adjustable limit switches. |
Slow start / slow stop.
Overlap feature for dual swing gate operation.
Magnetic lock output.
Ports for plug-in loop detectors.
Fully enclosed screw drive.
120 VAC input power.
Built-in battery back-up.
Separate control panel.
Keyed release for manual operation.
OPTIONS AVAILABLE WITH THIS OPERATOR:
Master / slave connection cable.
Magnetic gate lock.
Plug-in loop detectors.
|Specifications||Maximum gate width 10-feet. |
Maximum gate weight 500 pounds*.
(*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
Swings gate 90 degrees in approximately 20-seconds.
Actuator operates at 24 VDC, 3 Amps.
Class I applications.
Compliant with UL 325 and 991. ETL Listed.
(Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
Dimensions (actuator only):
4"W x 3.75"H* x 48"L
Dimensions (deluxe control box):
12.25"W x 24.25"H x 4.25"D
Dimensions (standard control box):
12.25"W x 16.25"H x 4.25"D