HySecurity StrongArm 36 UPS


  • Brand: HySecurity
  • Product Code: StrongArm 36 UPS
  • Availability: In Stock


Description

HySecurity StrongArm 36 UPS

HySecurity STRONGARM 36 with UPS BACKUP is a powerful, rugged, hydraulic barrier arm operator that exceeds all operator reliability, longevity, maintenance and security standards. Smoothly cycle a formidable 2 x 5 inch arm without fail for decades. Lowest total cost of ownership. The Uninterruptible DC Power Supply provides 300 cycles UPS backup after an AC power loss.*

Open a 36 ft arm, to full 90º, in 8 seconds and rest in open or closed position. Center yoke mount for aluminum-fiberglass arm. Few moving parts, all enclosed in secure, strong uni-body 10 gauge welded and zinc plated steel chassis. Powder coat safety yellow for high visibility and an enduring, attractive finish. Keyed T-lock option protects all electrical controls and parts from vandalism. Optional arm light kit.

Retain full functionality during an AC power outage using HySecurity’s advanced DC Power Supply with HyCharger DC™, a powerful 50A three stage charger, custom built for continuous duty and long battery life. The DC Power Supply is a separate insulated and ventilated enclosure containing two sealed maintenance free AGM 110Ah, 12VDC batteries. Available in single phase only: Low voltage: 115V 60/50 Hz (requires 30A branch circuit) or High voltage: 208-230V 60/50 Hz (requires 15A branch circuit). Be certain to order the correct HyCharger DC™ voltage model as chargers are not field convertible.

Easily configure barrier arm operation to specific site requirements with unique and unequalled Smart Touch Controller. PC interface provided for easy configuration and quick troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload latest software, troubleshoot system and save operator configurations. Programmable dual gate or sequenced gate integration. Three configurable user relays plus optional Hy8Relay™ - an extended relay module providing eight additional programmable relay outputs.

Monitor gate system and accessory status, system operational malfunctions, maintenance alerts, or gate breach alarms. Communicate security or operational events to security command and control or service technician in real time via Ethernet/fiber using optional web based HyNet™ Gateway. Target specific security and operational alerts to specific recipients. View or download 16,000 plus events (logged in non-volatile memory) from a remote location or on-site for precise and quick system troubleshooting. Operate and configure gate remotely.

Note: HySecurity’s DC Power Supply enclosure must be mounted within 10 ft (3 m) of the operator with a minimum of 6 gauge wire used to connect between the DC supply and gate operator. For longer distances, call HySecurity Tech Support. Barrier arm and arm mounting bracket prices are not included in StrongArm base prices. See “StrongArm Options” for arm configurations and arm assembly prices. Arms 30 ft (9 m) or longer require cable tensioner and arm stabilizer kit and additional counterweights.

Specification

Features
Features Very long arms
Aluminum-fiberglass up to 36 ft (11 m) Arms longer than 30 ft require cable tensioner and arm stabilizer kit.

2,000 cycles/day duty cycle
Integrated controls and hydraulics in vandal resistant locked enclosure

Reliable hydraulics
Heavy duty, secure chassis with extremely reliable hydraulics. Contains only one gallon of high performance environmentally friendly hydraulic fluid.
Specifications
Specifications Duty Cycle 2,000 cycles/day*

Open/Close Time 8 seconds to open; 8 seconds to close

Arm Length Max Up to 36 ft (11 m)**

Arm Design Center yoke mount. Aluminum-fiberglass up to 36 ft (11 m)**

Horsepower 3/4 hp

Drive Hydraulic

Uninterruptible Power Supply DC Power Supply w/HyCharger DC™ provides up to 300 cycles after an AC power loss.*

1 Phase Power 115V 60/50Hz, 23A*** or 208-230V 60/50Hz, 11.5A

3 Phase Power n/a

Temperature Rating -40° to 158° F (-40° to 70° C) No heater necessary

Communication RS-232, RS-485, Ethernet/fiber using optional HyNet™ Gateway accessory

User Controls Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and 32 character, OLED display or a PC using S.T.A.R.T. software.

Relays Three configurable user relays: one 30VDC, 3A solid state and two 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs

ETL Listed (UL325) Usage Class I, II, III, IV

Enclosure DC Power Supply: Type 3R, 30w x 30h x 12d inch (76w x 76h x 30.5d cm)

Finish Zinc plated with yellow powder coating

Warranty 5 year

Downloads

Reviews (0)

Write a review

Note: HTML is not translated!
    Bad           Good