Menu
Your Cart

Doorking 6004 Swing Gate Actuator

Doorking 6004 Swing Gate Actuator
Doorking 6004 Swing Gate Actuator
Doorking 6004 Swing Gate Actuator
Doorking 6004 Swing Gate Actuator
-47 %
Doorking 6004 Swing Gate Actuator
Doorking 6004 Swing Gate Actuator
Doorking 6004 Swing Gate Actuator
Doorking 6004 Swing Gate Actuator
Downloads
Doorking 6004 Mounting and Control Box Options
Doorking 6004 Brochure
Doorking 6004 Swing Gate Actuator
  • Stock: In Stock
  • Model: 6004-380
  • SKU: DKS6004-380
$1,039.00
$1,976.00

 

 

 

Made In America

The DKS residential column mount swing gate operator offers convenience and reliability in a compact design. The Model 6004 is ideal for operating residential swing gates that are mounted on large columns. The 6004 mounts directly on the column and simplifies installation by eliminating the need to cut niches on the column, and there is no need for concrete pads. Using a strong gear reduction system, there is no need to worry about hydraulic leaks, or check valves or pumps. The DKS 6004 features a keyed release system that allows the gate to be moved by hand if a system failure should occur.

The Doorking 6004 Column Mount operates on 24 Volt DC power and features built-in limit switches that precisely control the start / stop speed and travel of your gate. The microprocessor-based electronic control board provides many advanced features typically not found in operators in this class. 120 Volt AC can power the control box, then converted to 24 Volt DC to power the actuator and control board. Two 120 Volt control boxes are available to choose from, Deluxe and Standard. The Deluxe control box includes three 120 VAC outlets to power accessory transformers. Both include 3.5 Ah (Amp Hour) batteries for backup power operation. You can also select our Solar Powered control box, eliminating the need for high-voltage power runs.


Product Info
Features Fully enclosed drive mechanism Adjustable built in limit switches precisely control the start / stop speed, and travel of gate for smooth operation 24 VDC operating power Batteries included Built-in battery charger Ports for Exit and Reverse plug-in loop detectors 90° in approximately 18 seconds Gate overlap feature for dual gate operation Magnetic lock power circuit Built-in reset and test buttons Maximum run timer Built-in high current warning
Specifications Maximum gate width 8-feet. (Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator. ) Maximum gate weight 500 lbs. Operates at 24 Volts DC power. Class I applications. Compliant with UL 325 and 991 Dimensions (operator only): 5.13"W x 5.25"H x 16"L. Operator main arm: 17.5" in length, with a total Height of 6.5" including the arm drive bolt. Dimensions (120 Volt deluxe control box): 14.5"W x 24"H x 4.25"D Dimensions (120 Volt standard control box): 12.5"W x 16.5"H x 4.25"D Dimensions (Solar control box): 13"W x 21"H x 8"D

Write a review

Note: HTML is not translated!
Bad Good

This website uses cookies to ensure you get the best experience on our website. Privacy Policy