- Stock: In Stock
- Model: B680H
- SKU: FAB680H-L
Available Options
This is the heavyweight model in FAAC's hydraulic barrier gate opener lineup. The new FAAC B680H Barrier Gate is FAAC's most heavy-duty hydraulic gate opener! It operates barrier arms from 20' up to 26' safely, quickly, and reliably. Limited-time sale now available! Designed for over 2 million continuous cycles, it features an integrated speed and position sensor for precise movement, reversing the barrier when obstacles are detected. The counter-balance spring has been tested for over 2 million cycles. The hydraulic pump with a brushless motor ensures smooth, high-speed operation of both long and short barrier arms under continuous use (100% duty cycle).
Designed for over 2,000,000 continuous cycles, the FAAC B680H Barrier Gate features an integrated speed and position sensor for precise movement control, reversing the barrier arm when an obstacle is detected. The counter-balance spring has been tested for over 2 million cycles. The hydraulic pump, equipped with a brushless motor, ensures smooth operation of both long and short barrier arms at high speeds and under continuous use (100% duty cycle).
Any barrier arms for the FAAC B680H exceeding 20 feet are assembled from two modules up to 26 feet, making transportation easier. Once assembled, the joint is invisible, and optional LED lighting can run along the entire length of the arm. All barrier arms are windproof, round or elliptically profiled, and feature rubber protection at the bottom. The E680 microprocessor control board enables integration of the B680H with advanced control systems, offering numerous programmable inputs and outputs, along with two high-sensitivity loop detectors.
The housing is non-load-bearing and can be easily removed, leaving the body post in place for 360-degree access during installation or maintenance. It is available in stainless steel or painted steel versions. The steel options are available in four colors, featuring a 100-micron epoxy zinc primer for enhanced corrosion resistance. Once installed, the cover can be easily attached or removed along with the barrier arm and bracket. Get your FAAC Barrier Gate Opener today! Barrier Gate is FAAC's best and heaviest-duty hydraulic barrier gate opener! Run barrier arms to cover drives from 20' up to 26' safely, quickly, and DEPENDABLY! And NOW ON SALE FOR A LIMITED TIME!
| Product Info | |
| Manufacturer's Warranty | 2 Year Manufacturer's Warranty |
| Features | Simple, step-by-step mechanical setup Automatic control board setup with just 2 steps Easy to access control board DIN bar already fitted and spaced for further accessories Optional Battery backup Sectional barrier arms Reverse on contact Retrofitable with foundation plate of FAAC 620 and 640 barriers Hybrid technology: Hydraulic + Brushless motor Over 2,000,000 continuous use cycles without special maintenance Removable covers available in 4 colors or stainless steel Programmable opening speed: 1.5 seconds for 7.5 ft barrier arms up to 6 seconds for 27 ft Easy-to-program advanced control unit Integrated encoder (with reverse in the event of obstacle) Two integrated Loop Detectors Master/Slave logic Optional flashing LED traffic lights with anti-vandalism system and LED lights for barrier arm Compatible with 620 and 640 foundation plate |
| Specifications | Power supply voltage: 100 to 240 Vac 50 (60) HzMax motor load: 240 WAccessories power supply: 24 VDCMax accessories load: 800 mAProtection fuses: 4 self-resettingPause time: Programmable (from 0 to 4.1 min)Motor power: Programmable on 50 levelsMotor speed: Programmable on 50 levelsTerminal board inputs: Loop 1, Loop 2, Open, Close, Closing Safety, Stop, Emergency, Power Supply. 36VDC, Battery XBAT, BUS 2-EasyConnector inputs: Encoder, Bar release sensor, Integrated flashing light, USB (for updating firmware)Terminal board outputs: Flashing lamp 24V, Brushless motor, Accessories power supply 24 VDC, 4 programmable outputs (one with relay)Electric motor: Brushless 36 VDCAbsorbed power: 240 WAbsorbed current: 1.1 A (at 230 V)Motor rotation speed: 1,000 to 6,000 r.p.m.Pump flow rate: 3,2 l/min (max)Electronic deceleration: Absolute magnetic encoderOperating ambient temperature: -4°F - 131°F (-20°C - +55°C)Weight: 187 lb (143 lb body + 44 lb cover)Type of oil: FAAC HP OILBarrier body treatment: 100 micron epoxy zinc-plating anti-corrosion treatment + paint |