FAAC B680H-S Barrier Gate (up to 16.5' Openings)

  • Brand: FAAC
  • Product Code: B680H
  • Availability: In Stock

Price: $3,550.00 $2,185.00

Available Options


FAAC B680H-S Barrier Gate (up to 16.5' Openings)

FAAC introduces their new B680H, a hydraulic barrier gate operator sporting an impressive brushless motor!  Designed for over 2,000,000 continuous cycles before needing any special maintenance.  It's the first of it's kind.  The switching power supply, with high energy efficiency and extended voltage range, ensures operation from 100VAC to 240VAC.  The integrated speed/position sensor allows precise control of the movement and reversing of the barrier arm when an obstacle is detected. The counter-balance spring of the B680H has been tested for over 2 million cycles.  The hydraulic pump with brushless motor guarantees the movement of long or short barrier arms at high speeds and continuous use (100%duty cycle).  The optional battery backup solution ensures operation in case of power-failure.  Any of the barrier arms for the FAAC B680H that 20 feet longer are made by joining 2 modules up to 26 feet to ease in transportation - once the modules have been assembled, the connection joint is invisible and optional LED lighting may be fixed to the entire length of the arm. All the barrier arms are windproof, round or elliptically profiled and are supplied with rubber protection on the bottom.  The E680 microprocessor control board ensures integration of the B680H with advanced control systems. It has numerous programable outputs/inputs and two integrated, high-sensitivity Loop Detectors.  The housing is non load-bearing and may be easily removed, with the body post remaining in place, allowing access from 360 degrees while installing or servicing.  It is available in stainless-steel or colored steel versions. The steel is available in four colors with 100-micron, epoxy zinc primer anti-corrosion treatment.  Once the body has been installed, with the bracket and the barrier arm, the cover can be easily installed or removed. Get you FAAC Barrier Gate Opener Today!


Product Info
Manufacturer's Warranty 2 Year Manufacturer's Warranty
Features Simple, step-by-step mechanical setup
Automatic control board setup with just 2 steps
Easy to access control board
DIN bar already fitted and spaced for further accessories
Optional Battery backup
Sectional barrier arms
Reverse on contact
Retrofitable with foundation plate of FAAC 620 and 640 barriers
Hybrid technology: Hydraulic + Brushless motor
Over 2,000,000 continuous use cycles without special maintenance
Removable covers available in 4 colors or stainless steel
Programmable opening speed: 1.5 seconds for 7.5 ft barrier arms up to 6 seconds for 27 ft
Easy-to-program advanced control unit
Integrated encoder (with reverse in the event of obstacle)
Two integrated Loop Detectors
Master/Slave logic
Optional flashing LED traffic lights with anti-vandalism system and LED lights for barrier arm
Compatible with 620 and 640 foundation plate
Specifications Power supply voltage:
100 to 240 Vac 50 (60) Hz

Max motor load:
240 W

Accessories power supply:
24 VDC

Max accessories load:
800 mA

Protection fuses:
4 self-resetting

Pause time:
Programmable (from 0 to 4.1 min)

Motor power:
Programmable on 50 levels

Motor speed:
Programmable on 50 levels

Terminal board inputs:
Loop 1, Loop 2, Open, Close, Closing Safety, Stop, Emergency, Power Supply. 36VDC, Battery XBAT, BUS 2-Easy

Connector inputs:
Encoder, Bar release sensor, Integrated flashing light, USB (for updating firmware)

Terminal board outputs:
Flashing lamp 24V, Brushless motor, Accessories power supply 24 VDC, 4 programmable outputs (one with relay)

Electric motor:
Brushless 36 VDC

Absorbed power:
240 W

Absorbed current:
1.1 A (at 230 V)

Motor rotation speed:
1,000 to 6,000 r.p.m.

Pump flow rate:
3,2 l/min (max)

Electronic deceleration:
Absolute magnetic encoder

Operating ambient temperature:
-4°F - 131°F (-20°C - +55°C)

187 lb (143 lb body + 44 lb cover)

Type of oil:

Barrier body treatment:
100 micron epoxy zinc-plating anti-corrosion treatment + paint


FAAC B680H Brochure 5.22MB
FAAC B680H Manual 5.99MB

Reviews (1)

Write a review

Note: HTML is not translated!
    Bad           Good