Menu
Your Cart

EMX CS101 Free Exit Probe Kit

EMX CS101 Free Exit Probe Kit
New
Downloads
EMX CS101 Brochure
EMX CS101 Manual
EMX CS101 Free Exit Probe Kit
  • Stock: In Stock
  • Model: CS101-100
  • Weight: 7.00lb
$225.00

Available Options

 

 

 

The CarSense101 vehicle motion detector kit has a sensing probe that is typically buried in the dirt, out of site, next to the driveway, but it can be used in nearly any practical fashion. Housed in a small, relay-type housing, the CarSense101 detector tucks away and is easy to use with any gate opener.

For gate automation requiring free exit, the CarSense101 vehicle motion detector with sensing probe detects vehicles moving towards the gate and can automatically trigger the opener. Typically used for exiting, it can also be used for entering (where livestock control is the goal over security). For that configuration, a second probe can be installed and wired to the same detector, so the gate will automatically open, regardless of what side the vehicle approaches from.

The CarSense101 vehicle motion detector with sensing probe provides a solution for many vehicle detection challenges. Where safety is an issue, the CarSense101 can detect moving vehicles in blind areas along a driving path, and can be used to actuate warning lights.

Where security is an issue, the CarSense101 can detect approaching vehicles or an unauthorized movement of a parked vehicle and activate an alarm, video camera, etc..

Product Info
Kit Includes100' cable attached to probe sensor CS101 Detector Socket Base
FeaturesControls and indicators are mounted on front panel Available in 9 – 41 VDC 6 – 29 VAC Low 2.5 mA standby current consumption (excellent for solar applications) Housed in a small, relay-type housing Surge protection Filter Adjustable Output Time Adjustable Sensitivity Easy to use and install Easy upgrade or switch out to new devices Quick access to controls Buried sensing probe is not visable
SpecificationsPower Supply: 9 – 41 VDC or 6 – 29 VACPower Supply Tolerance: +/-20% from the power ratingStand-by Current: 2.5mA maximumDetect Current: 50mA maximumRelay Type: DPDTRelay Rating: 1A 24V DC 120V ACSensitivity: High, Low adjustmentOff Delay: 1 to 5 seconds adjustmentControl Unit Temperature Range: -40° F to 170° FProbe Temperature Range: -40° F to 170° FPower On Indicator: High intensity Green LEDDetect Indicator: High intensity Red LEDSensitivity Control: Continuous adjustmentOff Delay Control: Continuous adjustmentSurge Protection: MOV, neon and silicon protection devicesControl Unit Housing: Break resistant PolycarbonateDimensions: H:2.2”(55mm), W:1.6”(41mm), D:3.25”(84mm)Connector: 86CP11 11 pin connectorProbe: PVC water tight housing (Length 17”, Diameter 1”) with shielded direct burial lead-in cable

Write a review

Note: HTML is not translated!
Bad Good

This website uses cookies to ensure you get the best experience on our website. Privacy Policy