Menu
Your Cart

HySecurity SlideSmart HD25 Commercial Slide Gate Operator

HySecurity SlideSmart HD25 Commercial Slide Gate Operator
HySecurity SlideSmart HD25 Commercial Slide Gate Operator
HySecurity SlideSmart HD25 Commercial Slide Gate Operator
HySecurity SlideSmart HD25 Commercial Slide Gate Operator
New -48 %
HySecurity SlideSmart HD25 Commercial Slide Gate Operator
HySecurity SlideSmart HD25 Commercial Slide Gate Operator
HySecurity SlideSmart HD25 Commercial Slide Gate Operator
HySecurity SlideSmart HD25 Commercial Slide Gate Operator
Downloads
HySecurity SlideSmart HD Spec Sheet
HySecurity SlideSmart HD Manual
HySecurity SlideSmart HD25 Commercial Slide Gate Operator
  • Stock: In Stock
  • Model: SLIDESMART-HD25
$3,250.00
$6,225.00

 

 

 

The SlideSmart HD25 is a heavy-duty slide gate operator designed and manufactured by HySecurity. This electromechanical model can cycle a 2,500 lb, 50ft gate at an adjustable speed of 0.75/1/or 1.25s (Speed setting cannot be configured to exceed 1 ft/s for Class I and II usage safety). This operator offers over 70 user-configurable settings to meet site-specific requirements.



Product Info
FeaturesGate Weight Max: 2,500lb Gate Length Max: 50ft Pull Force*: 450lb Rate of Travel: 0.75, 1 or 1.25 ft/s (23, 30 or 38 cm/s) Open/Close speed set independently Duty Cycle: Continuous Operator Horsepower: 1/2hp Drive: Electromechanical Uninterruptible Power Supply Battery Backup Temperature Rating: -13ºF to 158ºF (-25ºC to 70ºC) No heater necessary. Voltage Input: 115V or 208-230V, 60/50Hz. Accessory Power: 12VDC and 24VDC 1A each Communication: USB, RS-232, RS-485. Ethernet/fiber using optional HyNet™ Gateway accessory User Controls: Smart DC Controller with 70+ configurable settings. 32 character LCD display and 5 tact buttons or a PC using S.T.A.R.T. software. Relays: Two configurable user relays: 30VDC, 3A solid state and 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs Finish: Zinc rich primer chassis with black powder coated steel cover ETL Listed (UL 325): Usage Class I, II, III, IV* Cycle Tested: 500,00 Cycles Includes: 30 ft. #40, Corrosion-Resistant Roller Chain, EMX IRB-MON Photo-Eye Set, and 5 ft. Premium ASO Edge Sensor Warranty: 5-year (7-year single-family residence)
SpecificationsDuty Cycle: Continuous Travel Speed: 0.75, 1 or 1.25 ft/s (23, 30 or 38 cm/s) Gate Length: 50 ft (15 m) Gate Capacity: HD25 - 1,500 lb (680 kg) / HD30 3,000 lb (1,361 kg) Operator HP: HD25 1/2 hp / HD30 1 hp Drive Type: Electromechanical Pull Force: HD25 400 lb / HD30 500 lb UPS: Standard battery backup gate travel: Two 8Ah batteries. Up to 4,000 ft (1,219 m) after AC power loss. Extended battery backup gate travel: Two 50Ah batteries. Up to 25,000 ft (7,620 m) after AC power loss.* Field configurable to fail open or secure when batteries deplete. Voltage Input: 115V or 208-230V 60/50Hz Accessory Power: 12VDC and 24VDC 1A each Temperature Rating: -13° to 158° F (-25° to 70° C) Communication: USB, RS-232, RS-485; Ethernet/fiber using optional HyNet™ Gateway accessory Relays: Two configurable user relays: 30VDC, 3A solid state and 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs App Class: Usage Class I, II, III, IV Finish Type: Zinc plated chassis; molded polyethylene cover Cycle Tested: 500,000 cycles Manufacturer Warranty: 5 year / 7 year single-family residential

Write a review

Note: HTML is not translated!
Bad Good

This website uses cookies to ensure you get the best experience on our website. Privacy Policy