|Features||StrongArmPark DC is HySecurity’s innovative electromechanical parking and revenue control barrier arm operator. It provides continuous duty with UPS battery backup and meets the high cycle, high reliability and low maintenance demands of the parking, residential, commercial and industrial automatic gate operator requirements. |
Intelligent charging system monitors battery conditions to maximize battery life.
Dynamic reversing feature greatly reduces the possibility of injury or vehicle damage.
Configure gate operation to exact user needs with the sophisticated and easy-to-use Smart DC Controller and Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.).
Optional Hy8Relay™ provides eight additional relay output terminals to the Smart DC Controller. Each user relay can be configured to perform a specific function, including revenue control options.
The HyProtect™ advanced breakaway arm mount is standard equipment for all StrongArmPark DC operators. If a vehicle hits a straight arm, the nylon bolts in the mount break allowing the arm to swing out of the way, lessening damage to the vehicle and operator and reducing the cost of arm replacement. Refit the arm in less than a minute! The HyProtect™ arm mount adapts easily to typical aftermarket arms such as 1 x 4 inch wood or 2.5 inch square PVC.
|Specifications||Duty Cycle Continuous* |
Open/Close Time 3 speeds: 2.5/3/3.5 seconds. Field adjustable
Arm Length Max 10, 12, and 14 ft (3, 3.7 and 4.3 m) standard lengths
Arm Design Custom aluminum (standard). Optional articulating arm, combination aluminum-PVC; 7 ft clear/8 ft extended (2.1 m/2.4 m); 8 ft clear/10 ft extended (2.4 m/3 m); 9 ft clear/11 ft extended (2.7 m/3.4 m)
Full Open Angle Arm full open angle: Adjustable 90º ± 10º
Handing Left handing standard. Right handing available.
Horsepower 1/2 hp
Uninterruptible Power Supply Two 8Ah batteries. Operates for thousand plus cycles after AC power loss.* Field configurable to fail open or secure when batteries deplete.
Voltage Input 115VAC, 3A, 60/50 Hz or 208-230VAC, 1.5A, 60/50 Hz
Accessory Power 12VDC and 24VDC 1A each
Temperature Rating -13º to 158º F (-25º to 70º C) No heater necessary
Communication USB, RS-232, RS-485; Ethernet/fiber using optional HyNet™ Gateway accessory
User Controls Smart DC Controller with 70+ configurable settings. 32 character LCD display and 5 tact buttons or a PC using S.T.A.R.T. software.
Relays Two configurable user relays: 30VDC, 3A solid state and 250VAC, 10A electromechanical. Optional Hy8Relay™ for 8 additional relay outputs
ETL Listed (UL325) Usage Class I, II, III, IV
Finish Zinc plated with powder coating
Cycle Tested 2 million cycles
Warranty 2 year