Doorking 6100 Swing Gate Operator


  • Brand: DKS DoorKing
  • Product Code: 6100-080
  • Availability: In Stock


Available Options


Description

Doorking 6100 Swing Gate Operator

Pad Mount Post Mount
13.25"W x 12"H* x 23"D 13.25"W x 12"H* x 23"D
Doorking 6100 Swing Gate Operator DKS 6100 Swing Gate Operator

The Doorking 6100 Swing Gate operators are designed to operate vehicular swing gates in residential and commercial applications. These Swing Gate operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of the DoorKing 6100 Swing Gate operators allows the gate arm to attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. The 6100 Swing Gate Operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

Specification

Features
Features Self-adjusting, no maintenance limits.
Overlap feature for dual swing gate operation.
Designed with a built-in primary and secondary entrapment prevention system.
Ports for plug-in loop detectors.
Fail-safe release.
Tamper detect circuit.
DC Powered convenience open (Option on 6100 only).
Gate tracker reporting output.
Programming switches.
Built-in reset switch.
Built-in power On/Off switch.
Specifications
Specifications Model 6100: Maximum gate width 14-feet.
Maximum gate weight 500 pounds*. *Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.
Swings gate 90 degrees in approximately 10-seconds.
1/2 HP continuous-duty motor.
115 VAC, 5.4 Amps.
Class I and Class II applications.
Compliant with UL 325 and 991. ETL listed. Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.
Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)

Dimensions (operator only): 13.25"W x 12"H* x 23"D (28"D with convenience open option) (* Height of operator only. Actual height above ground is determined by which mounting method is used)

OPTIONS AVAILABLE WITH THIS OPERATOR:
Master / slave connection cable
6050 slave operator is shipped with 30-feet of cable; 6100 slave operator is shipped with 40-feet of cable.
Post or pad mount - specify which.
DC powered convenience open (6100 only).
Plug-in loop detectors.
Heater kit for cold environments.

Downloads

DKS 6050/6100 Pad Mount 114.3KB
DKS 6050/6100 Post Mount 116.25KB
Doorking 6100 Brochure 662.08KB
Doorking 6100 Quickstart 1.37MB

Reviews (0)

Write a review

Note: HTML is not translated!
    Bad           Good