Nice Apollo 3501 Swing Gate Opener uses the new and advanced 1050 circuit board. This gate is designed to support up to 1000 lbs. weight and up to 20 ft. length. This gate opener is a post mounted operator with an articulating arm. The arm is designed in a way to eliminate major pinch areas making it perfect for heavy-duty commercial as well as residential applications. This swing gate opener uses a 12V battery that is charged either through solar power or AC power. The operator is installed easily on most existing or new gates, with adjustment of the extension arm and limit switches.
The motor’s modern design allows for compact and easy installation. A 4x4 post with dense wall tubing is recommended. This gate is corrosion resistant and very durable.
- Battery Operated, Solar or AC Charged Swing Gate Operator
- Recommended for heavy duty continuous Commercial use on gates up to 20 feet and 1000 lbs.
|Features||Easy to install LCD Display Plug-in receiver: up to 1,000 rolling-code transmitters 7 day programmable event timer Innovative Obstacle Detection System Surge Protection Programmable Inputs and Outputs Advanced Dual Gate Management Solar power compatible Built in solar regulator Corrosion resistant Solar power compatible APPLICATIONS: Battery Operated, Solar or AC Charged Slide Gate Operator. Recommended for Commercial applications. Recommended for most gates up to 20 ft. opening and 1000 lbs. each.|
|Specifications||OPEN OR CLOSE CYCLE TIME: 12 to 20 seconds depending on installation. BATTERY/ CONTROL PANEL BOX: 18’’ (46cm) x 18’’ (46cm) x 8’’ (20cm) Powder Coated Black BATTERY REQUIREMENT: 12-volt battery. Apollo recommends a maintenance-free, deep cycle marine battery capable of running 105 amp. /hour. CIRCUIT BOARD: The advanced 1050 board is compatible with all 12 V and 24 V Nice Apollo products. MOUNTING: A 4×4 post with heavy wall tubing recommended. WARRANTY: All Apollo Gate Operators have a two-year limited warranty against manufacturing defects.|