The FAAC Model 390 was designed primarily to accommodate large pillar/column installations. This unit provides a sleek solution to avoid using a bulky ground unit, and it reaches around the column to move the gate, which allows you to avoid the need to cut/notch out the rock or brick to accommodate a traditional residential linear actuator. This electromechanical swing gate openers is designed for light duty, single family residential property, and is perfect for the single swing or double swing column mount gates, wall mount gates or carriage doors.
- The system has non reversing motors that hold the gate in the open and closed positions
- Electronic control unit with anti-crushing device and virtual encoder with reverse function upon detection of obstacle
- Emergency battery to ensure operation in case of power failure
- IMPORTANT to ensure correct operation, make sure that the distance between the gate hinge and the gate pier edge is maximum 11.8 Inches (300mm)
The Electro-mechanical operator is simple to install, requiring no welding.
|Features||Features Two year limited warranty New and improved EO24U Control Board Increased gate length & weight capacity Built-in Battery Backup includes Batteries Sleek design No gate modifications are necessary Easy installation Reverse on contact Slow down "soft stop"|
|Specifications||Quick Specs Max Gate Length 14 ft Max Gate Weight 600 lbs Traveling Speed 13 - 16 Seconds per 90° Maximum Gate Swing 120 degrees Duty Cycle 100% Continuous Duty Input Voltage 115V AC Single Phase Secondary/Accessory Voltage 24V DC Operating Temperature -4°F 10 131°F Battery Backup 30-50 Cycles (average) Control Box Nema 4 (rust proof) Warranty 2 years|