- Entrapment prevention system reverses gate on contact
- Smooth operation no slamming when gate closes
- Arm joint cover helps eliminate pinch points
The Doorking 6050 operator is designed to operate vehicular swing gates in residential and commercial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. The 6100 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.
|Pad Mount||Post Mount|
The DKS 6050 swing gate operator is designed to operate vehicular swing gates in residential applications. These operators can be installed on mounting posts or directly onto a concrete mounting-pad. The unique design of these operators allows the gate arm to attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation.
|Features||Self-adjusting, no maintenance magnetic limits. Overlap feature for dual swing gate operation. Designed with a built-in primary and secondary entrapment prevention system. Ports for plug-in loop detectors. Fail-safe release. Tamper detect circuit. DC Powered convenience open (Option on 6100 only). Gate tracker reporting output. Programming switches. Built-in reset switch. Built-in power On/Off switch. OPTIONS AVAILABLE WITH THIS OPERATOR: Bi-parting gate connection cable (6050 secondary operator is shipped with 30-feet of cable; 6100 secondary operator is shipped with 40-feet of cable.) Post or pad mount - specify which. DC powered convenience open (6100 only). Plug-in loop detectors. Heater kit for cold environments. Surge suppressors.|
|Specifications||Model 6050 Maximum gate width 10-feet. Maximum gate weight 400 pounds*. *Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator. Maximum gate cycles (per day): 100 Swings gate 90 degrees in approximately 10-seconds. 1/2 HP limited-duty motor. 115 VAC, 4.3 Amps. Class I applications. Compliant with UL 325 and 991. ETL Listed. Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards. Dimensions (operator only): 13.25"W x 12"H* x 23"D * Height of operator only. Actual height above ground is determined by which mounting method is used|