- Stock: In Stock
- Model: CS101-100
- Weight: 7.00lb
Available Options
The CarSense101 vehicle motion detector kit has a sensing probe that is typically buried in the dirt, out of site, next to the driveway, but it can be used in nearly any practical fashion. Housed in a small, relay-type housing, the CarSense101 detector tucks away and is easy to use with any gate opener.
For gate automation requiring free exit, the CarSense101 vehicle motion detector with sensing probe detects vehicles moving towards the gate and can automatically trigger the opener. Typically used for exiting, it can also be used for entering (where livestock control is the goal over security). For that configuration, a second probe can be installed and wired to the same detector, so the gate will automatically open, regardless of what side the vehicle approaches from.
The CarSense101 vehicle motion detector with sensing probe provides a solution for many vehicle detection challenges. Where safety is an issue, the CarSense101 can detect moving vehicles in blind areas along a driving path, and can be used to actuate warning lights.
Where security is an issue, the CarSense101 can detect approaching vehicles or an unauthorized movement of a parked vehicle and activate an alarm, video camera, etc..
| Product Info | |
| Kit Includes | 100' cable attached to probe sensor CS101 Detector Socket Base |
| Features | Controls and indicators are mounted on front panel Available in 9 – 41 VDC 6 – 29 VAC Low 2.5 mA standby current consumption (excellent for solar applications) Housed in a small, relay-type housing Surge protection Filter Adjustable Output Time Adjustable Sensitivity Easy to use and install Easy upgrade or switch out to new devices Quick access to controls Buried sensing probe is not visable |
| Specifications | Power Supply: 9 – 41 VDC or 6 – 29 VAC Power Supply Tolerance: +/-20% from the power rating Stand-by Current: 2.5mA maximum Detect Current: 50mA maximum Relay Type: DPDT Relay Rating: 1A 24V DC 120V AC Sensitivity: High, Low adjustment Off Delay: 1 to 5 seconds adjustment Control Unit Temperature Range: -40° F to 170° F Probe Temperature Range: -40° F to 170° F Power On Indicator: High intensity Green LED Detect Indicator: High intensity Red LED Sensitivity Control: Continuous adjustment Off Delay Control: Continuous adjustment Surge Protection: MOV, neon and silicon protection devices Control Unit Housing: Break resistant Polycarbonate Dimensions: H:2.2”(55mm), W:1.6”(41mm), D:3.25”(84mm) Connector: 86CP11 11 pin connector Probe: PVC water tight housing (Length 17”, Diameter 1”) with shielded direct burial lead-in cable |