When Strength, power and versatility are your requirements, then the Ramset RAM 5000 Series is your solution. This slide gate operator comes in 1/2, 3/4, or 1 horsepower, continuous duty motor, this series capable of opening gates as heavy as 3000 pounds, and can be used in residential, commercial, or industrial applications. All Ram 5000 gate operators include our Whisper quiet motor operation.
|Features||Control Board: easy to configure solid state board with features such as LED readouts to indicate status of operator at all timesElectronic Reversing Device (ERD): two separate adjustments for reversing when encountering obstruction during opening or closing; reverses for 1 second and stopsAudio Alarm: audio alarm will sound for approximately six minutes, but only when the gate hits an obstruction twice; input to reset alarm includedAutomatic Timer: can be set from 0 to 60 secondsMaximum Running Timer: motor shuts off after 60 secondsMaster/Slave: included five wire connection to synchronize movement between two gatesElectronic Inputs: for radio receiver, fire department box, numeric key pad, metal detector, center loop, telephone entry system, three button station, photo cell, safety edge and magnetic lockMechanical FeaturesMotor: Ram-5200 - instant reversing 1 HP, 220 VAC, 4.5 amp, 1625 rpm continuous duty motorMaximum Gate Size: Ram-5200 - 40' @ 3000 lbs.Cycles: capable of continuous operation under appropriate loadGate Traveling Speed: approximately 12" per secondChassis: robust 1/4" hot rolled metal, sanded, and zinc/gold plated to inhibit corrosionSpeed Reducer: high quality worm gear reducer continuously lubricated in an oil bathCover: black heavy-duty fiberglass with high gloss finishEmergency Release: hand crank release or optional battery back-up system (bbs-2000)Shipping Weight: 120 lbs./145 lbs./155 lbs.Warranty: 10-Years limited warranty|
|Specifications||Maximum Travel / Weight 40 ft / 1000 lbs Motor: Continuous Duty Operating Temperature: -10 to 160 degrees F Overall Dimensions: 25” x 16 ½” x 18 ½”|