The HySecurity StrongArm 20 is an American-made hydraulic barrier arm that operates with great power and durability. This industrial-grade barrier arm can be in continued use reliably for decades on end.
Operation
The HySecurity StrongArm 20 makes it possible to configure the operation of the product to the site requirements. It's strong and durable enough to lift a 20-foot barrier arm to 90 degrees in an average of three seconds. This product can continue to operate and remain in motion up to 2,000 times each day for constant use in high-traffic areas.
The HySecurity StrongArm 20 is easy to use and configure with the included Smart Touch Controller. When it's held open, it can remain vertical and stays in place. Arms up to 18 feet can be held by the side mount. A 20-foot arm can also be supported with the center yoke mount. The electrical controls and parts are fully protected by a uni-body 10-gauge steel chassis. A high level of protection is also offered with the included keyed T-lock option to ensure the electrical components are not damaged due to vandalism. The arm can also rest in the open or closed position.
Design
The HySecurity StrongArm 20 has few moving parts and with aluminum and fiberglass options available. It uses the latest software and is easy to troubleshoot with the Smart Touch Analyze and Retrieve Tool. It's designed to allow the user to download or view up to 16,000 events on-site or from a remote location for added convenience and increased operation.
This security arm has a bright yellow powder coating to increase its visibility from a distance for added security. The thick materials are durable and solid, allowing the parts to hold up well when they're exposed to the elements each day. Over 70 configurable settings are available for more versatility.
Product Info | |
Features | Full 90° open prevents tall vehicles from clipping arm Seamless synchronization with all HySecurity operators for dual gate, sally port or sequenced gate integration DOT model includes breakaway arm mount which reduces the cost of arm replacement or operator damage due to a vehicle strike |
Specifications | Duty Cycle 2,000 cycles/day*** Open/Close Time 3 seconds to open; 4 seconds to close Arm Length Max Up to 20 ft (6 m)* Side mount available for arms up to 18 ft (5.5 m) Arm Design Side mount - aluminum up to 18 ft (5.5 m), fiberglass up to 16 ft (5 m) or wood up to 14 ft (4.3 m). Center yoke mount - aluminum up to 20 ft (6 m) Horsepower 3/4 hp Drive Hydraulic Uninterruptible Power Supply Optional 230V AC Power Supply w/HyInverter AC™ provides up to 300 cycles after an AC power loss.*** 1 Phase Power 115/208/230V 60Hz; 110/220V 50Hz** 3 Phase Power 208/230/460V or 575V** 60Hz; 220/380V 50Hz** Temperature Rating -40° to 158° F (-40° to 70° C) No heater necessary Communication RS-232, RS-485, Ethernet/fiber using optional HyNet™ accessory User Controls Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and 32 character, OLED display or a PC using S.T.A.R.T. software. Relays Three configurable user relays: one 30VDC, 3A solid state and two 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs ETL Listed (UL325) Usage Class I, II, III, IV Enclosure n/a Finish Zinc plated with yellow powder coating Warranty 5 year |