- Stock: In Stock
- Model: M50
- SKU: Hy-M50
The HySecurity StrongArm M50 is built for sites where the threat assessment calls for a higher speed rating. It is certified to ASTM F2656-07 M50-P2: a 15,000 lb truck at 50 mph, with about 1.2 meters of penetration. It shares the StrongArm M30's hydraulic drive and controls, so you get the higher rating without giving up speed or duty cycle.
Specifications
| Spec | StrongArm M30 | StrongArm M50 |
| Crash rating | ASTM F2656-07 M30-P1 (about 1 m penetration) | ASTM F2656-07 M50-P2 (about 1.2 m penetration) |
| Clear opening | 12 to 24 ft in 2 ft steps; custom lengths on request | 12 to 24 ft in 2 ft steps; custom lengths on request |
| Drive | Hydraulic, 2 hp | Hydraulic, 2 hp |
| Duty cycle | 100 cycles per hour; continuous duty option | 100 cycles per hour; continuous duty option |
| Open/close time | 6 to 8 seconds, depending on arm length | 6 to 8 seconds, depending on arm length |
| Emergency fast operation | 5 to 7 seconds | 5 to 7 seconds |
| Open angle | 90° | 90° |
| Backup power | AC Power Supply with HyInverter AC (208/230 VAC single-phase) | Same |
| No-power model | StrongArm M30 NP | StrongArm M50 NP |
| Finish | Powder-coated or hot-dip galvanized steel | Same |
Features
- Lower bumper arm sits at passenger-car height, so a car can't duck under the upper arm.
- Key-locked pivot post covers protect the hydraulics and controls from tampering.
- Monitored photo eye and LED arm lighting for safety and visibility.
- Heating and cooling options for extreme climates. CE-certified models are available for international projects.
No-power models
The StrongArm M30 NP and M50 NP are manually operated versions for high-security, low-traffic sites with no power at the gate. They open in about 1 to 3 minutes and close in about 15 to 25 seconds, depending on arm length.
Getting a quote
StrongArm barriers are built to order and shipped direct to your job site, so pricing is by quote. Call 713-330-3333 (Mon-Fri, 10-5 Central) or use the Ask Question button. To quote quickly we need:
- The crash rating on your drawings or spec (M30 or M50)
- Clear opening width
- Power at the gate, or a no-power model
- Finish and any heating or cooling needs
- Ship-to location and timeline
Need protection beside the arm? See our StrongSlide M30 crash-rated slide gate and HySecurity M30 and M50 bollards.
FAQ
What's the difference between the StrongArm M30 and M50?
The M30 is certified to stop a 15,000 lb truck at 30 mph (M30-P1). The M50 is certified at 50 mph (M50-P2). Use the rating your site's threat assessment or project spec calls for.
Is the StrongArm M30 the same as a regular StrongArm parking arm?
No. Standard StrongArm models control traffic. The StrongArm M30 and M50 are crash-tested barriers built to stop a vehicle.
Can it work without power?
Yes. The M30 NP and M50 NP are manually operated for sites with no power at the gate.
| Product Info | |
| Features | M50 Install - Get your Crash Installation Authorization from HySecurity and learn how to install StrongArm Crash Products.Dual gates - Synchronize your dual gates for ultimate security.StrongArmCrash M50 Crash Test - Crash certified to ASTM F2656-07 M50, P2. Stopped a 15,00 lb (6.8 metric ton) truck traveling 50 mph (80 km/h)in less than 1.3 meters.M50 catch post with photo eye - Monitored photo eye helps protect a vehicle and avoid personal injury by stopping the M50 arm if object is in the way. |
| Specifications | Crash Certified ASTM F2656-07 M50-P2* Clear Opening 12 to 24 ft in 2 ft increments (366 to 732 cm in 61 cm increments). Call for custom arm length. Open/Close Time 6 to 8 seconds depending on arm length Emergency Fast Time 5 to 7 seconds depending on arm length Duty Cycle 100 cycles/hr, option for continuous duty Warranty 5 year |