|Features||Because physical contact is not required, proximity card readers can read card data through common building materials like: concrete, brick, stone, drywall, plaster, glass, wood, plastic...in fact, through anything but metal. |
Proximity card readers are maintenance free. There are no parts to wear out or adjust.
Passive card technology provides an unlimited number of "card reads" with no battery to wear out. Active cards provide a much longer read range, but use a battery that will require replacement in time (2-years approximately).
Passive cards, unless they are physically abused, will last virtually forever.
Clamshell, ISO Graphic and KeyTag type cards are available.
Read ranges are not absolute and will vary depending on several factors including where the reader is mounted, the mounting surface and product application.
These card readers output their data in 26-bit wiegand format.
Most card readers operate on 5-12 VDC. AVI systems operate at different voltages.
These cardreaders are not designed for stand-alone operation (see 1520/1524 readers) and must be connected to an access controller (DKS 1830 Series systems).
|Specifications||1815‐280 (SR 2400); up to 4‐inch read range. |
1815‐281 (SP 6820); up to 8‐inch read range.
1815‐282 (MM 6800); up to 8‐inch read range.
1815‐290; 1815‐280 reader on a surface mount enclosure.
1815‐292; same as 1815‐290 but also includes a 2358‐010 Tracker expansion board.
1504‐122; 1815‐281 mounted on surface enclosure with built in intercom substation.
1815‐283 (MR 1824); up to 24‐inch read range. Includes regulated power supply.
1815‐284 (MR 1824 MC); metal compensated; up to 16‐inch read range. Includes regulated power supply.
Long Range Vehicle Tag Reader
1815‐160 (LR 2000).
1815‐168 Installation Kit.
1815‐162 Power Supply.
1508‐072 Mounting Bracket.
Read range varies depending on the type of tag used. Maximum read range is 15 feet.
Installation kit is mandatory for proper setup, otherwise warranty will be void (AWID Policy.)